An inadequate level of noise attenuation provided by a building element is frequently the
result of a lack of completeness in the construction. This often invisible fault acts as a noise
source in a room, so in order to undertake remedial work the source position must be found.
Recently, near field noise intensity measurement has been the popular method for noise
source location in buildings. This method of using intensity studies requires a grid of readings
to be taken. An alternative method, the one used in this work, employs a different strategy.
Here, the source location is identified by direction scanning of time delays at a number of
microphones arranged in a regular three-dimensional array.
A novel arrangement of seven microphones, in the shape of a wheel-brace, is used to measure
the differences in time taken for the sound waves to travel from a source to the various
microphones. The magnitudes of these time differences are combined and converted into the
coordinates of the source, relative to an origin which is placed at the centre of the wheel-brace
array. The mathematics for this conversion is derived and the errors in the experimental
arrangement discussed.
The use of this airay for the identification of faults in built structures is explored. A significant
contribution is made to the knowledge of noise source location in buildings, since the
microphone array is used to demonstrate the location of a noise source irrespective of the
direction of the incoming noise.
The use of computerised data collection is described for a budget system, where time was
cheap, but equipment expensive. The accuracy of the technique would be improved
considerably if state-of-the-art electronics were used to measure the lime differences. The
feasibility, advantages and potential performance of a modem system, that could be
assembled today, is described and discussed.
Date of Award | 1994 |
---|
Original language | English |
---|
Awarding Institution | |
---|
Noise source location in the built environment, using a simple microphone array
Latham, M. (Author). 1994
Student thesis: PhD