Dual Mode Control of an Inverted Pendulum: Design, Analysis and Experimental Evaluation

Laura Alvarez Hidalgo*, Ian Howard

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

37 Downloads (Pure)

Abstract

We present an inverted pendulum design using readily available V-slot rail components and 3D printing to construct custom parts. To enable the examination of different pendulum characteristics, we constructed three pendulum poles of different lengths. We implemented a brake mechanism to modify sliding friction resistance and built a paddle that can be attached to the ends of the pendulum poles. A testing rig was also developed to consistently apply disturbances by tapping the pendulum pole, characterizing balancing performance. We perform a comprehensive analysis of the behavior and control of the pendulum. This begins by considering its dynamics, including the nonlinear differential equation that describes the system, its linearization, and its representation in the s-domain. The primary focus of this work is the development of two distinct control modes for the pendulum: a velocity control mode, designed to balance the pendulum while the cart is in motion, and a position control mode, aimed at maintaining the pendulum cart at a specific location. For this, we derived two different state space models: one for implementing the velocity control mode and another for the position control mode. In the position control mode, integral action applied to the cart position ensures that the inverted pendulum remains balanced and maintains its desired position on the rail. For both models, linear observer-based state feedback controllers were implemented. The control laws are designed as linear quadratic regulators (LQR), and the systems are simulated in MATLAB. To actuate the physical pendulum system, a stepper motor was used, and its controller was assembled in a DIN rail panel to simplify the integration of all necessary components. We examined how the optimized performance, achieved with the medium-length pendulum pole, translates to poles of other lengths. Our findings reveal distinct behavioral differences between the control modes.
Original languageEnglish
Article number6
Pages (from-to)120-143
Number of pages23
JournalAdvances in Science, Technology and Engineering Systems Journal
Volume8
Issue number6
DOIs
Publication statusPublished - 30 Dec 2023

Keywords

  • 3D printing
  • Inverted pendulum
  • State space control,
  • LQR
  • Luenberger observer

Fingerprint

Dive into the research topics of 'Dual Mode Control of an Inverted Pendulum: Design, Analysis and Experimental Evaluation'. Together they form a unique fingerprint.

Cite this